Mohawk's Break-A-Way Glaze is the perfect product to easily add
heavy hang up and detail accent color to ornate fine woodworking or
cabinetry. Break-A-Way Glaze is spray applied over a sanded sealer or
finish coat and then allowed to dry to a chalky, powdered state that is
easily removed from unwanted areas using light pressure with a synthetic
abrasive pad to the desired look that you are after. Break-A-Way Glaze
must be topcoated with a clear finish of your choice. (Note: Allow to
dry 1 hour after removing excess if topcoating with a water borne
finish.) Break-A-Way Glaze will help you create dramatic, clean accent
lines on any shaped surface. Break-A-Way Glaze may also be intermixed
to achieve custom colors. You may never want to wipe a glaze again after
trying Break-A-Way Glaze.
Spray applied (20 PSI)
May be used under or over water borne finishes
Superior hang and build compared to solvent glazes
